Year | Name of Faculty | Title of the Paper-Conference/Journal Details |
2023-2024 | Mr. Jeffin Johnson | Evaluation of the effect of strontium and tungsten carbide on the microstructure evolution, tribological and mechanical behaviour of Al-Zn-Mg-Cu-5Sr-WC metal matrix composite Journal of Metals, Materials and Minerals |
2023-2024 | Mr. Jeffin Johnson | Analytical hierarchy process-based maintenance
quality function deployment integrating total quality
management with total productive maintenance and
its application in dairy industry International Journal of Industrial and Systems Engineering |
2022-2023 | Dr. Vishnu Sankar | Intelligent robot for defect detection and rectification IEEE Explore |
2022-2023 | Mr. Akash James | A Viable Approach to Medical Image Processing for CFD Simulations of the Upper Respiratory Tract 3rd International Conference on Computing in Mechanical Engineering |
2022-2023 | Mr. Jithin K Francis | Investigations on Mechanical Properties of Wood Composite for Sustainable Manufacturing Materials Today: Proceedings : |
2022-2023 | Dr. Joseph Babu K | Micro‑tribological Characteristics of Ti6Al4V Alloy Subjected to Shot Blasting Surface Treatment Process Springer- Transactions of the Indian Institute of Metals |
2022-2023 | Dr. Mathew Joseph | Heat transfer enhancement using CNT coated needle electrodes in corona wind discharge system European Physical Journal Plus |
2022-2023 | Dr. Joseph Babu K | Development of calcium-based grease from coconut oil methyl ester and evaluation of its tribological properties PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE |
2022-2023 | Dr. Mathew Joseph | Investigations on Mechanical Properties of Wood Composite for Sustainable Manufacturing i-SMaRT 2022 |
2022-2023 | Dr. Thankachan T P | Investigations on mechanical properties of wood composite for sustainable manufacturing Materials Today: Proceedings |
2022-2023 | Dr. Mathew Joseph | Heat transfer phenomena of copper-graphene nanocomposite coated aluminium heat spreaders: An interferometric study Applied Thermal Engineering (Elsevier), Impact Factor 5.296, Volume 212, 25 July 2022, 118545https://doi.org/10.1016/j.applthermaleng.2022.118545 |
2022-2023 | Dr. Jibin Noble | Inventory management of perishable products with fixed shelf life for a
single echelon system Materials Today: Proceedings |
2022-2023 | Dr Ajith Kumar A. | Simulations for mechanical properties of polymer composites: investigations into suitability of numerical models for TPU-CNT with Mooney Rivlin (N = 1) and friction Mechanics of Time-Dependent Materials - Springer (SCI) https://doi.org/10.1007/s11043-022-09565-w |
2022-2023 | Mr. John Paul C D | Comparison of Simple Probabilistic Approach with Deterministic Model for Predicting Surge and Leakage in Water Pipelines Applications of Computation in Mechanical Engineering, Lecture Notes in Mechanical Engineering |
2022-2023 | Mr. John Paul C D | Easy Portability and Cost Effective Assistive Mechanism for the Visually Impaired ICT Infrastructure and Computing |
2022-2023 | Dr. Jibin Noble | A new (q*, S) policy to manage inventory for low shelf life products facing deterioration in quality and age differentiated requirements Computers & Industrial Engineering |
2022-2023 | Dr. Jibin Noble | Intelligent robot for defect detection and rectification 2022 Third International Conference on Intelligent Computing Instrumentation and Control Technologies (ICICICT) |
2021-2022 | Dr. Thankachan T P | Investigations on mechanical properties of wood composite for sustainable manufacturing Materials Today: Proceedings |
2021-2022 | Dr. Mathew Joseph | Characterisation of heat dissipation from PCM based heat sinks using Mach Zehnder Interferometry Heat and Mass Transfer (Springer) Impact factor 2.464 https://doi.org/10.1007/s00231-021-03101-1 |
2021-2022 | Mr. Tony Chacko | Thermal buckling and vibro acoustic behaviour of functionally graded graphene polymer layered composites subjected to in plane temperature variance Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications |
2021-2022 | Dr. Thankachan T P | Study on Al/TiB2 functionally graded metal matrix composites Materials Today: Proceedings |
2021-2022 | Mr. John Paul C D | COMPARISON OF SIMPLE PROBABILISTIC APPROACH WITH DETERMINISTIC MODEL FOR PREDICTING SURGE AND LEAKAGE IN WATER PIPELINE 3rd International Conference on Computing in Mechanical Engineering |
2021-2022 | Dr. Mathew Joseph | Investigations on chitin and coconut fiber reinforcements on mechanical
and moisture absorption properties of corn starch bioplastics https://doi.org/10.1016/j.matpr.2021.12.585 |
2021-2022 | Mr. Jeffin Johnson | Effect of Zirconium Dibromide and Aluminum Oxide Hybrid Particle Reinforcement on the Mechanical, Microstructure and Wear Properties of AA6063 Surface Metal Matrix Composite IOP Conference Series: Materials Science and Engineering |
2021-2022 | Dr. Thankachan T P | Data Mining Approach to Integrate Manufacturing Process Information in Part Design Phases Journal of Manufacturing Technology Research |
2021-2022 | Dr. Thankachan T P | Investigations on Chitin and Coconut Fiber Reinforcements on Mechanical and Moisture Absorption Properties of Corn Starch Bioplastics Materials Today: Proceedings |
2021-2022 | Mr. James Mathew | Design of Venturi for Hydrodynamic Cavitation using CFD |
2021-2022 | Fr. Dr. Joel George Pullolil | Design and fabrication of multi utility unmanned robot Materials Science and Engineering |
2021-2022 | Mr. Rathish T R | Design of methane/oxygen fuelled bipropellant rocket engine Second International Conference on Manufacturing, Material Science and Engineering, ICMMSE 2020, December 18-19, 2020 |
2021-2022 | Mr. Jithin P. N. | Effect of ground on the shape optimisation of a symmetrical aerofoil at low angles of attack Progress in Computational Fluid Dynamics, July 2021, Vol. 21, No.4, pp. 209 - 221 Inderscience Publishers Ltd. |
2021-2022 | Mr. Jithin P. N. | Design and Analysis of a Polycentric Knee Mechanism for Stair Ambulation International Conference on Aerospace & Mechanical Engineering (ICAME 21) |
2021-2022 | Dr. Thankachan T P | Computational analysis of Al-Li/TiC surface composite using friction stir processing SMPBE 2021 conducted by Manipal University Jaipur |
2021-2022 | Mr. Manu Joseph | Carbon fiber reinforced medical implants International Conference on Materials, Machines & Information Technology-2022 |
2021-2022 | Dr. Mervin Joe Thomas | Mathematical modeling of a novel 3-PPSS parallel manipulator Journal of Structural Engineering - CSIR (Madras) |
2021-2022 | Dr Ajith Kumar A. | Effect of ground on the shape optimisation of a symmetric aerofoil at low angles of attack. Progress in Computational Fluid Dynamics, An International Journal (PCFD)- Inderscience Publishers |
2021-2022 | Mr. Sidheek P. A. | Carbon fiber reinforced medical implants. International Conference on Materials, Machines & Information Technology - 2022" (ICMMIT-2022) |
2021-2022 | Dr. Mathew Joseph | Comparison of Metal oxide and Composite phase change material based nanofluids as coolants in mini channel International Communications in Heat and Mass Transfer https://doi.org/10.1016/j.icheatmasstransfer.2021.105541 (Elsevier), Impact Factor 5.683 |
2021-2022 | Mr. Jithin P. N. | Shape Optimisation of NACA4412 In-Ground Effect- Selection of a Turbulence Model. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Virtual, Online |
2021-2022 | Dr. Vishnu Sankar | Design of 3D volumetric display Journal of Physics: Conference Series |
2021-2022 | Dr. Vishnu Sankar | Conversion of Two-Stroke Vehicle to an Electric Vehicle Journal of Physics: Conference Series |
2021-2022 | Dr. Vishnu Sankar | Conversion of internal combustion engine car to semi-autonomous electric car Journal of Physics: Conference Series |
2021-2022 | Mr. James Mathew | Design and optimization of an atmospheric water generator using
thermoelectric cooling modules 3rd International Conference on Contemporary Advances in Mechanical Engineering. |
2021-2022 | Dr. Vishnu Sankar | Multi‐fuel performance and emission characteristics of an optimized Thermal barrier coated diesel engine Environmental Progress & Sustainable Energy |
2021-2022 | Dr. Jibin Noble | Design of 3D volumetric display Journal of Physics: Conference Series |
2021-2022 | Dr. Jibin Noble | Conversion of Two-Stroke Vehicle to an Electric
Vehicle Journal of Physics: Conference Series |
2021-2022 | Dr Ajith Kumar A. | A viable approach to medical image processing for CFD simulations of
upper respiratory tract Third International Conference on Computing in Mechanical Engineering Department of Mechanical Engineering, SCMS, Cochin September 22nd- 24th, 2021 (Accepted for publication LNME Springer) Applications of Computation in Mechanical Engineering - Select Proceedings of ICCME 2021 (Scopus) 978-981-19-6031-4, 517830_1_En (11) |
2021-2022 | Dr Ajith Kumar A. | Comparison of Simple Probabilistic Approach with Deterministic Model for Predicting Surge and Leakage in Water Pipelines Third International Conference on Computing in Mechanical Engineering Department of Mechanical Engineering, SCMS, Cochin September 22nd- 24th, 2021 (Accepted for publication LNME Springer) Applications of Computation in Mechanical Engineering - Select Proceedings of ICCME 2021 (Scopus) 978-981-19-6031-4, 517830_1_En (23) |
2021-2022 | Dr. Vishnu Sankar | Design and fabrication of multi utility unmanned robot IOP Conference Series: Materials Science and Engineering |
2020-2021 | Mr. Jithin P. N. | Reverse gear mechanism on a motor cycle ICDEM 2019 |
2020-2021 | Mr. Tony Chacko | Vibro-Acoustic Behaviour of Functionally Graded Graphene Reinforced Polymer Nanocomposites International Conference on Design, Materials & Manufacture (IcDeM 2019) |
2020-2021 | Dr. Vishnu Sankar | Fabrication and testing of a gamma type stirling engine Materials today: proceedings |
2020-2021 | Dr. Vishnu Sankar | Design and fabrication of foldable electric bicycle Materials today: proceedings |
2020-2021 | Mr. John Paul C D | Design of Venturi for Hydrodynamic Cavitation using CFD NCAME'21 |
2020-2021 | Dr. Vishnu Sankar | Optimization of thermal barrier coatings in a single cylinder diesel engine using thermal analysis and genetic algorithm Journal of Physics: Conference Series |
2020-2021 | Mr. Rathish T R | Numerical investigation of VARTM process using finite volume method Materials Today: Proceedings |
2020-2021 | Dr. Vishnu Sankar | Fuzzy Logic Based Optimization Method for Mechanical Systems and its Application International Journal of Mathematics and Computer Science |
2020-2021 | Dr. Thankachan T P | Fabrication and testing of a gamma type stirling engine Materials Today: Proceedings |
2020-2021 | Dr. Thankachan T P | Study on Al/TiB2 functionally graded metal matrix composites Materials Today: Proceedings |
2020-2021 | Mr. Jeffin Johnson | Integration of Total Quality Management with Total Productive Maintenance to develop Maintenance Quality Function Deployment model and its implementation study in food industry IOP Conf. Series: Materials Science and Engineering |
2020-2021 | Mr. Jeffin Johnson | Recent developments in Al7075 hybrid composites and study on its microstructure and mechanical characteristics IOP Conf. Series: Materials Science and Engineering |
2020-2021 | Dr. Vishnu Sankar | Optimization of biodiesel production by transesterification of palm oil and evaluation of biodiesel quality Materials today: proceedings |
2020-2021 | Mr. Jeffin Johnson | Design of mechanized buggy for the removal of solid wastes from drainages IOP Conf. Series: Materials Science and Engineering |
2020-2021 | Dr. Vishnu Sankar | Design and Analysis of Fire Fighting Drone Lecture Notes in Electrical Engineering, Advances in Electrical and Computer Technologies |
2020-2021 | Mr. Tony Chacko | Mechanical buckling of nanocomposites: Experimental and numerical investigations Polymers and polymer composites |
2020-2021 | Dr. Vishnu Sankar | Experimental Investigation of an Attachment to Self-Propel a Manual Conventional Wheelchair IEEE Explore |
2020-2021 | Dr. Mathew Joseph | Experimental investigation on the cooling performance of polystyrene encapsulated n-Docosane based nanofluid in mini channel heat sink Heat and Mass Transfer (Springer) Impact factor 2.464 https://doi.org/10.1007/s00231-021-03068-z |
2020-2021 | Dr. Joseph Babu K | Analysis On Crystal Formation And Physio-Tribological Properties Of Lithium Based Grease Developed From Coconut Oil (Cocos Nucifera) International Conference on Innovations in Mechanical Sciences (ICIMS 2021) 19th-20th February 2021, Kerala, India |
2020-2021 | Dr Ajith Kumar A. | Carbon fibre composite development for in-ground UAVs with NACA0012 aerofoil wing Materials Today: (Elsevier Scopus) |
2020-2021 | Dr. Mervin Joe Thomas | Can technological advancements help to alleviate COVID-19 pandemic? a
review Journal of Biomedical Informatics |
2020-2021 | Dr. Mervin Joe Thomas | Dynamic Modelling, System Identification and Comparative Study of Various Control Strategies for a Spatial Parallel Manipulator Journal of Systems and Control Engineering |
2020-2021 | Dr. Mervin Joe Thomas | Kinematic and Dynamic Analysis of a 3-PRUS Spatial Parallel Manipulator Chinese Journal of Mechanical Engineering - Springer Open |
2020-2021 | Dr. Mervin Joe Thomas | Comparative study of various machine learning
algorithms and Denavit–Hartenberg approach
for the inverse kinematic solutions in
a 3-PPSS parallel manipulator Industrial Robot: The International Journal of Robotics Research and Application |
2020-2021 | Dr. Mervin Joe Thomas | Kinematics, Structural Analysis and Control of 3-PPSS Parallel Manipulator International Journal of Innovative Technology and Exploring Engineering |
2020-2021 | Dr. Mervin Joe Thomas | Modelling and Analysis of 3-PSS Parallel Kinematic Mechanism Mechanism and Machine Science - Springer |
2020-2021 | Dr. Mervin Joe Thomas | Determination of inverse kinematic solutions for a 3 Degree of Freedom Parallel Manipulator using Machine Learning IEEE Students Conference on Engineering & Systems (SCES) |
2020-2021 | Dr. Mervin Joe Thomas | Development of a 4 PRR-2P Hybrid Robot for soft material Cutting Advances in Robotics 2017 |
2020-2021 | Dr. Joseph Babu K | Optimization of biodiesel production by transesterification of palm oil and evaluation of biodiesel quality Materialstoday: Proceedings (Elsevier) |
2020-2021 | Dr. Mathew Joseph | Novel Evaporatively Cooled
Split Air-Conditioner Cooling India Magazine, Vo. 7, 2011, pp. 1-14 |
2020-2021 | Dr. Mathew Joseph | THERMAL MANAGEMENT OF ELECTRONICS USING CNT LOADED
PHASE CHANGE MATERIAL BASED HEAT SINKS 16th UK Heat Transfer Conference (UKHTC2019) 8-10 September 2019, Nottingham |
2020-2021 | Dr. Mathew Joseph | An investigation on heat transfer performance of polystyrene encapsulated
n-octadecane based nanofluid in square channel Applied Thermal Engineering (Elsevier) Impact Factor 5.295 https://doi.org/10.1016/j.applthermaleng.2018.10.120 |
2020-2021 | Dr. Mathew Joseph | Graphene enhanced paraffin nanocomposite based hybrid cooling system for
thermal management of electronics Applied Thermal Engineering (Elsevier) 5.295 https://doi.org/10.1016/j.applthermaleng.2019.114342 |
2020-2021 | Dr. Mathew Joseph | An experimental investigation on the evaporation of polystyrene
encapsulated phase change composite material based nanofluids Applied Thermal Engineering (Elsevier) 5.295 https://doi.org/10.1016/j.applthermaleng.2019.114862 |
2020-2021 | Dr. Mathew Joseph | Thermal Performance of
Buildings: Case Study and
Experimental Validation of
Educational Building Vol.4, 2015, pp. 4968-4974 |
2020-2021 | Mr. Akash James | Design of methane/oxygen fuelled bipropellant rocket engine 2nd International Conference on Manufacturing, Material Science and Engineering 2020 |
2020-2021 | Mr. Jithin P. N. | Effect of ground on the shape optimisation of a symmetrical aerofoil at low angles of attack Progress in Computational Fluid Dynamics, July 2021, Vol. 21, No.4, pp. 209 - 221 |
2020-2021 | Fr. Dr. Joel George Pullolil | Region-specific biomass feedstock selection for gasification using multi-attribute decision-making techniques International Journal of Sustainable Engineering |
2019-2020 | Dr. Vishnu Sankar | Optimized Thermal Barrier Coating for Gas Turbine Blades Materials Today: Proceedings |
2019-2020 | Mr. K Uday Sankar | Decision Support Framework for Highway Network Design 5th International Conference on Industrial Engineering |
2019-2020 | Dr Ajith Kumar A. | Numerical studies on the height stability of a shape optimized NACA 0012 In Ground Effect. 64th International Congress of Indian Society Of Theoretical and Applied Mechanics (ISTAM) 9-12 December, 2019, Indian Institute of Technology Bhubaneswar. |
2019-2020 | Dr Ajith Kumar A. | Investigations on the shape optimization of NACA0012 in ground effect. 21st Annual CFD Sympo Aeronautical Society of India 8-9 August 2019. S.R. Valluri Auditorium National Aerospace Laboratories (NAL) Kodihalli, Bangalore 560 017 |
2019-2020 | Dr. Vishnu Sankar | Combined effects of thermal barrier coating and blending of diesel fuel with biodiesel in diesel engines Materials Today: Proceedings |
2019-2020 | Dr. Vishnu Sankar | Detachable Module for Semi-automating a Conventional Wheelchair Springer Transactions in Civil and Environmental Engineering, Advanced Manufacturing and Materials Science |
2019-2020 | Dr. Vishnu Sankar | Brainwave-Assisted Drive for Electric Vehicles Springer Transactions in Civil and Environmental Engineering, Advanced Manufacturing and Materials Science |
2019-2020 | Dr. Vishnu Sankar | Gasification of Sawdust in Bubbling Fluidised Bed Gasifier Springer Transactions in Civil and Environmental Engineering, Advanced Manufacturing and Materials Science |
2019-2020 | Fr. Dr. Joel George Pullolil | Experimental Investigation on the Feasibility of Sugarcane Bagasse for Gasification Advances in Energy Research |
2019-2020 | Mr. Jeffin Johnson | Design of Orthodox tea leaf chopping mechanism National Conference on Recent Advances in Materials, Manufacturing and Thermal Sciences (RAMMTS 2020) |
2019-2020 | Mr. John Paul C D | Design of Orthodox tea leaf chopping mechanism National Conference on Recent Advances in Materials, Manufacturing and Thermal Sciences (RAMMTS 2020) |
2019-2020 | Mr. Jeffin Johnson | Characterization of Al7075 hybrid composites National Conference on Recent Advances in Materials, Manufacturing and Thermal Sciences (RAMMTS 2020) |
2019-2020 | Mr. Jeffin Johnson | Recent developments in Al7075 hybrid composites and study on its microstructure and mechanical characteristics National Conference on “Recent Innovations & Advanced Trends in Mechanical Engineering (NCRIATME 2020) |
2019-2020 | Mr. Jeffin Johnson | Total Quality Management with Total Productive Maintenance to develop Maintenance Quality Function Deployment model and its implementation study in food industry National Conference on “Recent Innovations & Advanced Trends in Mechanical Engineering (NCRIATME 2020) |
2019-2020 | Mr. Manu Joseph | Design of mechanised buggy
for the removal of solid wastes from drainages 3rd National e - Conference on “Recent Innovations & Advanced Trends in Mechanical Engineering - NCRIATME - 2020 |
2019-2020 | Mr. Jeffin Johnson | Design of mechanised buggy for the removal of solid wastes from drainages National Conference on “Recent Innovations & Advanced Trends in Mechanical Engineering (NCRIATME 2020) |
2019-2020 | Mr. Sidheek P. A. | Semi-Autonomous RC Robot And Brainwave Technology International Conference on Microelectronics, Signals and Systems (ICMSS’19) |
2019-2020 | Fr. Dr. Joel George Pullolil | Theoretical and experimental feasibility study of groundnut shell gasification in a fluidized bed gasifier Biomass Conversion and Biorefinery |
2019-2020 | Mr. P P Krishnaraj | Performance Evaluation of an Improved Dual Purpose Solar Collector Advances in Energy Research |
2019-2020 | Fr. Dr. Joel George Pullolil | Enhancement of Biofuel Quality Through Sustainable In-bed Additives Green Buildings and Sustainable Engineering 2019. |
2019-2020 | Fr. Dr. Joel George Pullolil | Gasification of Sawdust in Bubbling Fluidised Bed Gasifier Green Buildings and Sustainable Engineering 2019 |
2019-2020 | Mr. Jithin P. N. | INVESTIGATIONS ON THE SHAPE OPTIMIZATION OF NACA0012 IN GROUND EFFECT 21st Annual CFD Symposium, NAL Bangalore |
2019-2020 | Mr. Jithin P. N. | Numerical studies on the height stability of a shape optimized NACA 0012 In-Ground Effect 64th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM 2019) December 9-12, 2019, IIT Bhubaneswar |
2019-2020 | Dr. Joseph Babu K | AN INTEGRATED APPROACH TO PLASTIC SORTING International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2019-2020 | Mr. John Paul C D | THE BIOGAS PURIFICATION UNIT FOR SMALL SCALE
BIOGAS DIGESTERS IN RURAL AREAS International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2019-2020 | Mr. Senjo Manuel | THE BIOGAS PURIFICATION UNIT FOR SMALL SCALE BIOGAS DIGESTERS IN RURAL AREAS International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) |
2019-2020 | Mr. Senjo Manuel | An Integrated Approach To Plastic Sorting International Journal of Mechanical and Production Engineering Research and Development. 2019;Vol 9:21-32. |
2019-2020 | Dr. Thankachan T P | Production and Machining Performance Study of Nano Al2O3 Particle-Reinforced (10 & 20%) LM25 Aluminum Alloy Composites Journal of Applied Mechanics and Technical Physics , ISSN: 0021-8944 |
2019-2020 | Dr. Thankachan T P | Fabrication and Testing of Stirling Engine International Mechanical Engineering Congress (IMEC-2019) |
2018-2019 | Dr Ajith Kumar A. | Numerical Investigations on the Wing-in-Deformable Ground Effect for Seaplanes International Conference on Computational and Experimental Marine Hydrodynamics MARHY 2018, IIT Madras |
2018-2019 | Dr Ajith Kumar A. | Structural Behavior of a Wing in Deformable
Ground Effect of a Seaplane International Journal of Recent Technology and Engineering (SCOPUS indexed in 2018-19) |
2018-2019 | Dr. Joseph Babu K | AN INTEGRATED APPROACH TO PLASTIC SORTING ICAME 2019 |
2018-2019 | Dr. Jibin Noble | Solid-State Reduction Studies on Manganese Ores International Conference on Green Buildings and Sustainable Engineering (GBSE 2018) |
2018-2019 | Fr. Dr. Joel George Pullolil | Assessement of producer gas composition in air gasification using artificial neural networks International Journal of Hydrogen Energy |
2018-2019 | Mr. Jithin P. N. | Design and Fabrication of Wheeled Inverted Pendulum Human Transporter Green Buildings and Sustainable Engineering pp 249-258, Part of the Springer Transactions in Civil and Environmental Engineering book series (STICEE) |
2018-2019 | Fr. Dr. Joel George Pullolil | Experimental investigation on co-gasification of coffee husk and sawdust in a bubbling fluidised bed gasifier Journal of the Energy Institute, |
2017-2018 | Dr Ajith Kumar A. | A simple probabilistic model for predicting burst-leakage in water pipelines International Multi-Conference on Computing, Communication, Electrical & Nanotechnology (I2CN-2K18) |
2017-2018 | Dr. Vishnu Sankar | Effect of Magnetic Field to Reduce Emissions and Improve Combustion Performance in a Spark- Ignition Engine Lecture Notes on Multidisciplinary Industrial Engineering, Advanced Manufacturing and Materials Science |
2017-2018 | Mr. P P Krishnaraj | Performance Evaluation Of An Improved Dual Purpose Solar Collector( 6th International Conference on Advances in Energy Research ICAER 2017 at IIT Bombay) |
2017-2018 | Nivish George | Non-Uniform Heat Effects on Buckling of Laminated Composite Beam: Experimental Investigations |
2017-2018 | Nivish George | Buckling and free vibration behavior of cylindrical panel under thermal load: Influence of graphene grading |
2017-2018 | Fr. Dr. Joel George Pullolil | |
2017-2018 | Fr. Dr. Joel George Pullolil | Effect of operating parameters in air-steam gasification Journal Of Advanced Engineering Research |
2017-2018 | Fr. Dr. Joel George Pullolil | EXPERIMENTAL INVESTIGATIONS ON AIR GASIFICATION OF COFFEE HUSK Proceedings IHMTC 2017 |
2017-2018 | Mr. K Uday Sankar | Regulating Travel Demand for Sustainable Transport: Road Pricing vs Incentive Schemes |
2016-2017 | Dr Ajith Kumar A. | Parametric study on the effect of a domestic wind catcher-solar chimney system for arid regions, International Research Journal of Advanced Engineering and Science, Volume 2, Issue 2, pp. 316-322, 2017. International Research Journal of Advanced Engineering and Science |
2016-2017 | Dr. Thankachan T P | Spheroidal Graphite Cast Iron Property Enhancement by Heat Treatment”, International Journal of Materials Research,2016, Vol 107, No. 9, 807-814. ISSN: 1862-5282. |
2016-2017 | Fr. Dr. Joel George Pullolil | Stoichiometric equilibrium model based assessment of hydrogen generation through biomass gasification
Procedia technology |
2016-2017 | Mr. Jithin P. N. | "Prediction of Hydrodynamic and Structural Behavior of V- Fin Depressors", International Journal of Scientific & Engineering Research, Volume 8, Issue 5, May-2017, pp: 926-931 |
2015-2016 | Dr. Vishnu Sankar | Performance and Emission characteristics of a Diesel engine running on Biodiesel International journal of Innovative Research in Science, Engineering and Technology |
2015-2016 | Dr Ajith Kumar A. | A comprehensive framework for the numerical simulation of evaporating electrosprays. Aerosol Science and Technology, Taylor & Francis |
2015-2016 | Dr. Thankachan T P | Spheroidal Graphite Cast Iron Property Enhancement by Heat Treatment”, International Journal of Materials Research,2016, Vol 107, No. 9, 807-814. ISSN: 1862-5282. |
2015-2016 | Mr. Jithin P. N. | Mechanical Characterization of shape memory alloy based RF MEMS switch using ANSYS |
2015-2016 | Mr. Jithin P. N. | A Study of wind pressure on tall buildings and it's aerodynamic modifications against wind excitation |
2014-2015 | Dr. Vishnu Sankar | Review on Adaptive Cruise Control in Automobiles International journal of Mechanical Engineering and Robotics Research |
2014-2015 | Dr. Vishnu Sankar | Thermal Barrier Coatings Material selection, Method of preparation and Applications-Reviews International journal of Mechanical Engineering and Robotics Research |
2014-2015 | Dr Ajith Kumar A. | Computer simulation of electrospraying of volatile liquids RICTA2014. The 2nd Iberian Meeting on Aerosol Science and Technology Tarragona, Spain. July 7-9, 2014. |
2014-2015 | Mr. Vineeth Krishna P | Fabrication of Friction Stir Processed Al-Ni Particulate Composite and Its Impression Creep Behaviour |
2014-2015 | Mr. Jeffin Johnson | Shrinkage Cavity Analysis in Butterfly Valve Disc Castings International Journal of Engineering Research & Technology (ISSN: 2278-0181 Vol. 2 Issue 11) |
2013-2014 | Dr Ajith Kumar A. | Two-way coupled numerical simulation of electrospray with induced gas flow Journal of Aerosol Science, Elsevier |
2013-2014 | Dr Ajith Kumar A. | Numerical simulations of evaporating electrosprays with Coulomb explosions AEROSOL TECHNOLOGY 2014 (AT2014) . Karlsruhe, Germany |
2013-2014 | Dr Ajith Kumar A. | Effects of induced gas flow on electrospray dynamics European Aerosol Conference (EAC 2013) Prague, Czech Republic |
2013-2014 | Dr. Thankachan T P | “Decision support tool for lean product and process development ”,International Journal of Production Planning & Control. 2013, Vol. 24, No. 6, 449–464. |
2013-2014 | Dr. Thankachan T P | "Decision support tool using concurrent engineering framework for agile manufacturing",International Journal of Agile Systems and Management, 2014,Vol. 7, No. 2, 132-154 |
2013-2014 | Mr. Mathew Baby | Influence of process parameters on cutting forces and Taguchi based prediction of T42-CT HSS single point cutting tool deflection International Journal of Scientific and Research Publications |
2013-2014 | Mr. Mathew Baby | Finite Element Modelling of Sliding Contact Wear in Aluminium International Conference on Materials for the Future - 2013 |
2013-2014 | Mr. Jithin P. N. | "Numerical investigation of the hydrodynamic behavior of the depressor”, International Journal of Mechanical Engineering and Robotic Research, Volume 3, Issue 1, Jan 2014, Pages 256- 264 |
2012-2013 | Mr. Mathew Baby | Product Life Assessment During the Early Stages of Product Design: A CATIA Based Study NACTON 2012 |
2012-2013 | Mr. Mathew Baby | Rapid Prototyping Materials – Frictional Wear: An Overview. NAIMSAP 2012 |
2012-2013 | Mr. John Paul C D | Experimental correlation for multimode heat transfer developed using asymptotic expansion method [International Communications in Heat and Mass Transfer, 46(2013), 22-26 ] |
2012-2013 | Mr. Mathew Baby | Ice Bonded Abrasive Polishing Process: A Review International Conference on Emerging Trends in Manufacturing Technology |
2010-2011 | Fr. Dr. Joel George Pullolil | Heat integration in process water networks Industrial & Engineering Chemistry Research |